Foamed PE insulated Low Loss Cables, 7.62mm(0.30inch) OD, 50ohm

LMR 300 cable type cables(RFCT P/N RLL300) show high performance, flexibility and low loss properties. These are usually used for interconnection of module, base station & antenna. Also LMR types of cables offer lower loss and better RF leakage compared with RG cable.

MECHANICAL DATA

 ITEM                  MATERIAL         DIAMETER    REMARK
Inner Conductor         Bare Copper          0.070”(1.78mm)
Dielectric         Foamed Polyethylene 0.190”(4.83mm)
1st Outer Conductor Sealed APA Tape          0.196”(4.98mm)
2nd Outer Conductor 90% Tinned Copper Braid 0.225”(5.72mm)
Jacket                  PE                  0.30”(7.62mm)       BLACK
 
ELECTRICAL DATA

ITEM                               SPECIFICATION
Minimum Bend Radius, in. (mm)  1.5(38.0)
Product Weight (less reel)         82㎏/㎞
Characteristic Impedance, Ω         50 ± 3
Velocity of Propagation, %           85
Capacitance, Nominal 24.2 pF/ft 79.4 pF/m
Attenuation, Nominal @ 68 °F (20 °C)
Frequency, MHz dB / 100 ft dB / 100 m   
50          1.5           4.9        
150        2.5           8.2
220        3.0           9.8
450        4.3          14.1
900        6.2          20.4
1500      8.0          26.3
2000      9.4          30.9
2500    10.6          34.8
5800    16.9          55.5

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

For the similiar cable type specification, please visit below link:

<<Similar Cable Specifications for Alternative Choice>>

Or send us an email for further inquiries.  >>info@rf-ct.com

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx