Foamed PE insulated Low Loss Cables, 6.1mm(0.24inch) OD, 50ohm
LMR 240 cable type cables(RFCT P/N RLL240) show high performance, flexibility and low loss properties. These are usually used for interconnection of module, base station & antenna. Also LMR types of cables offer lower loss and better RF leakage compared with RG cable.
MECHANICAL DATA
ITEM MATERIAL DIAMETER REMARK
Inner Conductor Bare Copper 0.056”(1.42mm)
Dielectric Foamed Polyethylene 0.150”(3.81mm)
1st Outer Conductor Sealed APA Tape 0.156”(3.95mm)
2nd Outer Conductor 95% Tinned Copper Braid 0.179”(4.55mm)
Jacket PE 0.240”(6.10mm) BLACK
ELECTRICAL DATA
ITEM SPECIFICATION
Minimum Bend Radius, in. (mm) 0.75(19.1)
Product Weight (less reel) 33.8 lbs /kft(35.26 ㎏/㎞)
Characteristic Impedance, Ω 50 ± 3
Velocity of Propagation, % 85
Capacitance, Nominal 24.2 pF/ft 79.4 pF/m
DC Resistance Ω / kft Ω / km
Inner Conductor 3.20 10.50
Outer Conductor 3.89 12.76
Loop 7.09 23.26
Attenuation, Nominal @ 68 °F (20 °C)
Frequency, MHz dB / 100 ft dB / 100 m
10 0.90 2.95
30 1.60 5.25
50 2.00 6.56
100 2.90 9.51
400 5.80 19.03
1000 9.00 29.53
1500 12.00 39.37
2000 13.00 42.65
2500 15.00 49.21
3000 17.00 55.77
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
For the similiar cable type specification, please visit below link:
<<Similar Cable Specifications for Alternative Choice>>
Or send us an email for further inquiries. >>info@rf-ct.com
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
